Double click to zoom

Earthquaker Devices Avalanche Run Stereo Reverb & Delay with Tap Tempo

$525.23 Regular price Haworth Savings $74.76 RRP $599.99
Found a better Price?

Price match now!




Get the most from your purchase with the Haworth Guarantee!
Free Shipping on Guitars*
Price Match Guarantee*
Freight Insurance
30 Day Credit Returns*
Pay in 4 Interest-FREE payments of
$131.3075 AUD with Learn more
SKU: M00001876

Earthquaker Devices Avalanche Run Stereo Reverb & Delay with Tap Tempo

The Avalanche Run is a dreamy stereosonic exploratory multi-tool that includes up to 2 seconds of delay time, reverse delay, tap tempo with subdivision control, switchable true bypass or buffered bypass with 5 different tail lengths (including a sound-on-sound style lo-fi looping mode) and an assignable expression control that maps the expression jack to a control of your choice, including the toggle! The delay section allows tweaking from tape emulation to bucket brigade styles with a twist of the wide-range Tone control. The cavernous, plate-style reverb has just a touch of modulation similar to the one found in EarthQuaker's Dispatch Master only more lush with an adjustable Decay. Otherworldly reverse delay and dynamic swelling reverb settings are accessible through a 3-way toggle switch. And that’s just the beginning...

Time: This controls the delay time and goes from 0ms to just under 2000ms.

Repeats: Controls the regeneration of the delay, from zero repeats to near infinite.

Tone: Controls the tone for the delay line only. Roll off highs to the left, roll off lows to the right and get a flat response in the middle.

Mix: The is the volume control for the delay line. This blends in the wet with dry until 1 o’clock, 1 o’clock to 3 o’clock boosts the wet signal over the dry and 3 o’clock up brings down dry until it is fully wet when all the way up.

Expression Jack Assign Switch: Use this switch to map the expression jack to one of the assigned controls.

Ratio Selector Switch: Selects delay subdivisions when time is set by the “Tap” switch.

Decay: Controls the decay length of the reverb, short decay counterclockwise, long cavernous decay clockwise.

Toggle Switch (Mode Selector): - "Both" is the standard delay and reverb mode, "Reverse" is reverse delay mode with standard reverb and "Swell" is the volume swell mode.

Mix: This is the volume control for the reverb. Blends in the wet with dry until 1 O’clock, 1 O’clock to 3 O’clock boosts the wet signal over the dry and 3 O’clock up brings down dry until it is fully wet when all the way up.

Features

  • Expansive Reverb and Delay unit

  • Up to 2 seconds of delay time

  • Includes Tap Tempo functionality and subdivision control

  • Multiple tail lengths

  • Lo-fi looping mode

  • Assignable expression control that incorporates exp. jack

  • Delay emulates tape to bucket brigade styles and reverse delay

  • Expressive plate reverb is capable of cavernous tones

  • Flexi-Switch™ allows you to simultaneously use momentary and latching style switching

  • EarthQuaker recommend use with a Moog expression pedal, they cannot guarantee compatibility with other expression pedals

  • Includes 9v centre-negative 1-amp DC power supply

  • All analog dry signal path

  • All digital wet signal path with 20Hz – 20kHz frequency response

  • Output Impedance: 100 Ohm

  • S/N Ratio: 115dB typical

  • 24-bit 96kHz A/D & D/A converters

  • Assembled, wired and tested in Akron, Ohio


Specifications

Measures: 4.65″ x 4.15″ x 2.25″ with knobs
Current Draw: 410mA
Input Impedance: 1M Ohm
Output Impedance: 100 Ohm
S/N Ratio: 115dB typical
24-bit 96kHz A/D & D/A converters
All analog dry signal path
All digital wet signal path with 20Hz – 20kHz frequency response
Expression Jack

The expression jack is located on the west side of the pedal. It is a TRS jack with the tip acting as the wiper.

We recommend using a Moog expression pedal with the output adjustment knob all the way up. 

We cannot guarantee any other expression pedal to work with the Avalanche Run.

Flexi-Switching
This device features Flexi-Switch™ Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power 
For best results, please use the included 9v center-negative 1-amp DC power supply.

PCBs populated by a combination of artificial and human intelligence in the Akron, Ohio of America.

Each and every Avalanche Run is completely assembled, wired and tested by total human beans in the tiny tundra town of Akron, Ohio.